If a CAN bus is equipped with a PCAN-Ethernet Gateway FD DR, a LAN interface is all that is needed to access the CAN bus with one or more computers. A conventional CAN interface is not required. When using two gateways, distant CAN buses can be connected via an IP network. The limiting factor of the maximum CAN bus length does not apply.
The configuration of the PCAN-Gateway product family is done just like with a common Internet router via a web interface. Status information and settings for the communication interfaces, message forwarding, and filters are available. Alternatively, a JSON interface allows access via software.
PEAK-System Technik GmbH
Otto-Röhm-Straße 69
64293 Darmstadt
Telefon: +49 (6151) 8173-20
Telefax: +49 (6151) 8173-29
http://www.peak-system.com
Telefon: +49 (6151) 8173-57
E-Mail: c.schoen@peak-system.com